Andis Size 4 Ultraedge Blade

Description

This Ultraedge Clipper Blades Are Made From HighCarbon Steel And Processed Through A Unique Carburizing Heat Treatment That Actually Adds Carbon To The Metal. More Carbon On The Metal Means A Harder Cutting Surface. Blades Hold A Razor Sharp Edge That Will Endure Prolonged Use And More Sharpening Treatments. This Blade Is Most Often Used For Body Work On LongLegged Terriers And For Blending. It Can Also Be Used As A Raking Blade On The Shoulder And Hip Area Of A Westie. Blade Sets Should Be Oiled Once A Day Minimum. Ideally It Should Be Done Before Every Grooming. After Oiling Be Sure To Use A Soft Dry Cloth To Wipe Any Oil Off The External Surfaces To Reduce The Possibility Of Getting It On The Animal's Coat. If The Clipper Blades Leave Streaks Or Slow Down It's A Sure Sign That The Blades Need Oil. Oiling Blades Place A Few Drops Of Blade Oil On The Front And Side Of The Cutter Blades. Wipe Excess Oil Off Blades With A Soft Dry Cloth. Spray Lubricants Contain Insufficient Oil For Good Lubrication But Are An Excellent Clipper Blade Coolant. Cleaning Blades Immerse Blades Only While Clipper Is Running In A Shallow Pan Of Clipper Oil Or Blade Cleaner. After Cleaning Turn The Clipper Off And Dry Blades With A Clean Dry Cloth. If Blades Will Still Not Cut There May Still Be Some Hair Trapped Between The Upper And Lower Blade. Remove The Blade Off The Clipper And Slide The Upper Blade To One Side Without Loosening The Tension Spring Or Moving The Upper Blade Completely Out From Under The Tension Spring. Wipe The Surfaces Of The Blades Clean With A Dry Cloth Then Place A Drop Of Clipper Oil Where The Upper And Lower Blades Meet And Also In The Guide Slot Of The Tension Spring. Comes In Size4 SkipTooth And 3/8Inch Cut Length. Measures 44/5Inch Length By 31/2Inch Width By 11/2Inch Height.